Understanding the Five Most Important Parameters on Your Soil Test Report
CATION EXCHANGE CAPACITY (CEC)
The CEC is the number of negatively charged sites on the soil particles (mostly clay and organic matter) that can retain plant nutrients. It is expressed in units of meq/100g or cmolc/kg (1meq/100g=1cmolc/kg).
Positively-charged nutrients, such as Potassium, Calcium and Magnesium are electrically attracted to clay particles in soil.
Other positively-charged elements, such as Sodium and Hydrogen are also adsorbed on soil particles. Sodium can negatively affect soil structure and hydrogen ions determine the soil pH.
Soils which have higher CEC are considered to be more fertile than soils with low CEC, as they can potentially hold more nutrients for longer period of time. These soils also have greater water holding capacity.
Knowing the CEC of your soil can help you decide on fertilizer application frequency, as high CEC soils require less frequent applications.
Soil organic matter represents the organic constituents of the soil. Most of it are plant and animal residues. It contributes to the soil structure, the soil fertility and the water holding capacity of the soil. Soils rich in organic matter (4-5%) will be more fertile.
The organic matter can contribute nitrogen, phosphorus and sulfur to the crop.
Stands for Sodium Absorption Ratio. It is used to predict water infiltration problems in the soil and soil structure problems. SAR is the ratio of sodium to calcium plus magnesium in the soil solution.
Soils with SAR greater than 10 are considered to be sodic. Sodic soils have structural problems, which result in poor water infiltration. The soil tends to swell when wet and crack when dry.
Soil pH is one of the most important parameters on your soil test report. The pH level of the soil can tell you a lot about the potential availability of plant nutrients and on possible toxicities of other elements (such as aluminum).
Soils with pH greater than 7.0 are considered to be alkaline soils. Micronutrient deficiencies, such as iron deficiency, are common in these soils.
Crops grown in soils with pH level lower than 5.5 might show toxicity symptoms of metals (e.g. iron, manganese) and deficiencies of other nutrients, such as magnesium. Liming the soil is mostly recommended in such soils.
The ideal soil pH range for most crops is between 5.8 and 6.5, a range in which most nutrients are available for the crops to take them in.
Stands for Electrical Conductivity. It is a measure of the salinity of the soil. The EC is most commonly measured in the soil solution. Units of expression are usually ds/m, mmho/cm or microsimens/cm, where 1 ds/m=1mmho/cm = 1000 µs/cm.
The EC is one of the simplest ways to assess fertilizer levels in the soil, yield potential and soil salinity status and suitability for the crop growing on it.
Different crops have different tolerance levels to salinity. Above a certain threshold, yield will decrease. The yield reduction is proportional to the increase in the EC level.
- Recommends the ideal fertilizer mixture/ blends
- Saves up to 50% on fertilizer costs
- Comprehensive data on hundreds of crop varieties
- Interprets test results for any extraction method